不銹鋼玻璃門的不銹鋼包邊制作方法

The method of making stainless steel edging for stainless steel glass doors

　　把已經裁割好并經倒角的厚玻璃上下分別裝好上下橫擋，定好門扇的高度（高度包括上下橫在內），如果門扇高度不夠，可用上下橫擋內玻璃邊口處，填墊薄木夾板條進行調整，如果門扇高度超過安裝尺寸，則需請專業玻璃工裁去厚玻璃門扇的多余部分，因此門扇的玻璃高度寧可短點也不宜過高高度確定后應立即把玻璃與上下橫擋進行固定。

Install the upper and lower crosspieces of the thick glass that has been cut and chamfered respectively, and set the height of the door leaf (including the upper and lower crosspieces). If the height of the door leaf is not enough, it can be adjusted by filling thin wood splint strips at the edge of the glass inside the upper and lower crosspieces. If the height of the door leaf exceeds the installation size, it is necessary to ask a professional glassman to cut off the excess part of the thick glass door leaf. Therefore, the glass height of the door leaf should be shorter rather than higher. After determining the height, the glass should be fixed with the upper and lower crosspieces immediately.

　　其方法是在厚玻璃與上下金屬橫擋內的兩側空隙處同時插入小木條，并輕輕敲入其中，然后在小木條、厚玻璃與金屬橫擋空隙之間注入玻璃膠，最后把玻璃與金屬橫擋的空隙縫口用玻璃膠封嚴。

The method is to insert small wooden strips into the gaps on both sides of the thick glass and the upper and lower metal crosspieces, and gently tap them in. Then, inject glass glue between the small wooden strips, thick glass, and metal crosspieces, and finally seal the gaps between the glass and metal crosspieces with glass glue.

　　那叫無框玻璃門,先把玻璃按尺寸切好,用玻璃膠安裝在門框上面,門與門用門夾和地彈簧連接.然后用不銹鋼包邊(也可以用鋁塑板和石膏板等材料包邊)包邊里面要有木龍骨打底的。

That's called frameless glass door. First, cut the glass according to the size, install it on the door frame with glass glue, and connect the doors with door clips and floor springs. Then, use stainless steel edging (aluminum plastic board and gypsum board can also be used for edging). The edging should have a wooden keel as the base.

　　無框玻璃門，鋼化玻璃上下用門夾外包不銹鋼，下門夾跟地彈簧連接，上門框用鐵方管焊接外包不銹鋼與上門夾連接。

Unframed glass door, tempered glass is wrapped in stainless steel with door clips on top and bottom, and the lower door clip is connected to the ground spring. The door frame is welded with square iron pipes and wrapped in stainless steel to connect to the door clip.

　　有框玻璃門用矩形鋼管焊接鑲鋼化玻璃外包不銹鋼，門框用矩管焊接外包不銹鋼，門與門框用合頁固定。

Framed glass doors are welded with rectangular steel pipes, tempered glass is wrapped in stainless steel, door frames are welded with rectangular pipes and wrapped in stainless steel, and doors are fixed with hinges.

以上就是有關： 山東不銹鋼玻璃門 的介紹，想了解更多的內容請點擊：http://m.1221a.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to Shandong stainless steel glass doors. For more information, please click: http://m.1221a.com We will wholeheartedly provide you with full score service. Welcome to call us!